Derivations Master Hub: Every Important Derivation, Step by Step | eduPhysics

Derivations Master Hub: Every Important Derivation, Step by Step

Derivations are the core of Class 11 and 12 physics, and they appear in board exams as 3-mark and 5-mark questions. This hub gives you the key derivations in clear steps, from the starting assumption to the final result, with a note on where to read more.

18full derivations
8Class 11
10Class 12
eduPhysics logo: a brass telescope on a stand with the words Excellence in Physics Education

How to learn a derivation

Learn the skeleton

  • Start: which law or definition does it begin from?
  • Method: a force balance, an integral, energy conservation or geometry?
  • End: what is the final result and its units?

Practise actively

  • Cover the steps and rewrite them from memory.
  • Draw the diagram first, because it earns marks and shows the method.
  • State the assumptions, for example “small angle” or “ideal gas”.

Class 11 derivations

Equations of motion Kinematics

Constant acceleration a, starting velocity u, in a straight line.

  1. First equation. Since a = dv/dt, integrate from u to v as t goes from 0 to t: ∫ dv (u → v) = a ∫ dt (0 → t) ⇒ v − u = at
  2. Second equation. Put v = ds/dt = u + at, and integrate from 0 to s: ∫ ds = ∫ (u + at) dt ⇒ s = ut + ½at²
  3. Third equation. Write a = v dv/ds, so a ds = v dv. Integrate: a ∫ ds (0 → s) = ∫ v dv (u → v) ⇒ as = ½(v² − u²)
Results: v = u + at, s = ut + ½at², v² = u² + 2as
Projectile motion: time, height, range Kinematics

A projectile is launched from the ground with speed u at angle θ. Take g downward and ignore air resistance.

  1. Resolve the velocity. ux = u cosθ (constant) and uy = u sinθ, with ax = 0 and ay = −g.
  2. Time of flight. The projectile returns to y = 0: 0 = (u sinθ)T − ½gT² ⇒ T = 2u sinθ / g
  3. Maximum height. At the top vy = 0, so 0 = u² sin²θ − 2gH: H = u² sin²θ / 2g
  4. Range. R = ux T: R = (u cosθ)(2u sinθ / g) = u² sin2θ / g
  5. Path. Eliminate t from x = u cosθ·t and y = u sinθ·t − ½gt²: y = x tanθ − g x² / (2u² cos²θ) This is a parabola.
Results: T = 2u sinθ/g, H = u² sin²θ/2g, R = u² sin2θ/g (maximum at θ = 45°)
Work–energy theorem Work, energy and power

A body of mass m moves along x under a variable force F, with speed changing from u to v.

  1. Write the work. W = ∫ F dx.
  2. Use Newton’s second law. F = m a = m (dv/dt).
  3. Change the variable. Since dx = v dt, we get (dv/dt) dx = v dv: W = ∫ m v dv (u → v)
  4. Integrate. W = ½mv² − ½mu²
Result: The work done by the net force equals the change in kinetic energy, W = ΔK.
Escape velocity and orbital velocity Gravitation

Planet of mass M and radius R. Use GM = gR².

  1. Potential energy. At distance r, U = −GMm/r.
  2. Escape condition. To escape, the body must reach infinity with zero kinetic energy, so the total energy at the surface is zero: ½mve² − GMm/R = 0
  3. Solve. ve = √(2GM/R) = √(2gR)
  4. Orbital velocity. For a circular orbit of radius r, gravity gives the centripetal force: mv²/r = GMm/r² ⇒ vo = √(GM/r) Near the surface vo = √(gR).
  5. Compare. ve = √2 · vo.
Results: ve = √(2gR) ≈ 11.2 km/s for Earth; vo = √(gR) ≈ 7.9 km/s
Time period of a spring and a simple pendulum Oscillations
  1. Spring. The restoring force is F = −kx, so m d²x/dt² = −kx: d²x/dt² = −ω²x, ω² = k/m
  2. Solution. x = A sin(ωt + φ), which is simple harmonic motion with T = 2π/ω = 2π√(m/k)
  3. Pendulum. For a bob of mass m on a string of length L displaced by a small angle θ, the tangential restoring force is −mg sinθ ≈ −mgθ.
  4. Use arc length. With x = Lθ, θ = x/L: m d²x/dt² = −(mg/L) x ⇒ ω² = g/L
  5. Time period. T = 2π√(L/g)
Results: T = 2π√(m/k) for a spring; T = 2π√(L/g) for a pendulum (valid for small angles, below about 15°)

Read more: Oscillations: Complete Learning System

Bernoulli’s equation Fluids

Steady, incompressible, non-viscous flow in a pipe. Section 1 has area A₁, speed v₁, pressure P₁ and height h₁. Section 2 has A₂, v₂, P₂ and h₂.

  1. Continuity. In time Δt the same volume ΔV = A₁v₁Δt = A₂v₂Δt crosses both sections, with mass Δm = ρΔV.
  2. Work done by pressure. W = P₁ΔV − P₂ΔV
  3. Change in energy. ΔK = ½ρΔV (v₂² − v₁²), ΔU = ρΔV g (h₂ − h₁)
  4. Apply W = ΔK + ΔU and divide by ΔV: P₁ − P₂ = ½ρ(v₂² − v₁²) + ρg(h₂ − h₁)
  5. Rearrange.
Result: P + ½ρv² + ρgh = constant along a streamline

Torricelli’s law: for a hole at depth h below the open surface, P₁ = P₂ = atmospheric pressure and v₁ ≈ 0, so v₂ = √(2gh).

Read more: Bernoulli’s Principle

Pressure of an ideal gas Kinetic theory

N molecules, each of mass m, move in a cube of side L.

  1. One collision. A molecule with velocity component vx hits a wall and rebounds, so the momentum change is 2mvx.
  2. Collision rate. It crosses the cube and returns, so it hits the same wall vx/2L times per second.
  3. Force from one molecule. (2mvx)(vx/2L) = m vx² / L
  4. Sum over all molecules. F = (m/L) N⟨vx²⟩, so P = F/L² = m N ⟨vx²⟩ / V
  5. Use isotropy. ⟨vx²⟩ = ⟨v²⟩/3: P = ⅓ (Nm/V) ⟨v²⟩ = ⅓ ρ vrms²
  6. Link to temperature. Compare with PV = NkT to get ½mvrms² = (3/2)kT.
Results: P = ⅓ρvrms², average kinetic energy per molecule = (3/2)kT

Read more: Kinetic Theory of Gases

Isothermal work and Mayer’s relation Thermodynamics
  1. Isothermal work. For n moles at constant temperature T, P = nRT/V: W = ∫ P dV = nRT ∫ dV/V (V₁ → V₂) = nRT ln(V₂/V₁)
  2. Constant volume. No work is done, so the heat added equals the change in internal energy: dQ = n Cv dT = dU.
  3. Constant pressure. dQ = n Cp dT = dU + P dV. For an ideal gas dU = n Cv dT, whatever the process.
  4. Use PV = nRT at constant pressure, so P dV = nR dT: n Cp dT = n Cv dT + nR dT
Results: W = nRT ln(V₂/V₁) for an isothermal process; Cp − Cv = R

Read more: Thermodynamics: From Zero to Hero

Class 12 derivations

Parallel plate capacitor: field, capacitance and energy Electrostatics
  1. Field of an infinite sheet. Take a Gaussian pillbox of area A through a sheet of charge density σ. Flux goes only through the two end faces: 2EA = σA/ε₀ ⇒ E = σ/2ε₀
  2. Two plates. Between plates carrying +σ and −σ, the fields add: E = σ/ε₀. Outside they cancel.
  3. Potential difference. For separation d and charge Q = σA: V = Ed = σd/ε₀ = Qd / (ε₀A)
  4. Capacitance. C = Q/V: C = ε₀A / d
  5. Energy stored. Moving a small charge dq against the voltage q/C needs work dW = (q/C) dq. Integrate from 0 to Q: U = Q²/2C = ½CV² = ½QV
Results: C = ε₀A/d (and Kε₀A/d with a dielectric); U = ½CV²

Read more: Capacitors & Capacitance

Drift velocity and resistivity Current electricity
  1. Acceleration. A free electron in a field E accelerates at a = eE/m.
  2. Drift velocity. With average time τ between collisions: vd = aτ = eEτ / m
  3. Current. For n electrons per unit volume in a conductor of area A: I = n e A vd, J = I/A = n e vd
  4. Current density. Substitute vd: J = (n e² τ / m) E
  5. Compare with J = σE. The conductivity is σ = ne²τ/m, so the resistivity is the inverse.
Result: ρ = m / (n e² τ), and R = ρl/A
Force between two parallel current-carrying wires Magnetism
  1. Field of wire 1. At distance d, B₁ = μ₀I₁ / 2πd, directed perpendicular to the plane of the wires.
  2. Force on wire 2. A length l of wire 2 carries I₂ in this field, so F = I₂ l B₁.
  3. Substitute. F = μ₀ I₁ I₂ l / 2πd
  4. Direction. By the right-hand rule, parallel currents attract and opposite currents repel.
Result: F/l = μ₀I₁I₂ / 2πd. If I₁ = I₂ = 1 A and d = 1 m, then F/l = 2 × 10⁻⁷ N/m, which defines the ampere.

Read more: Force Between Two Parallel Current-Carrying Wires

Magnetic field inside a long solenoid Magnetism

A long solenoid has n turns per unit length and carries current I.

  1. Field shape. Inside, B is uniform and along the axis. Outside, it is nearly zero.
  2. Choose a loop. Take a rectangular Amperian loop abcd, with side ab of length h inside the solenoid, parallel to the axis.
  3. Line integral. The sides perpendicular to the axis give zero, and the side outside gives zero: ∮ B·dl = B h
  4. Enclosed current. The loop encloses nh turns, so Ienc = nhI.
  5. Ampere’s law. Bh = μ₀ n h I.
Result: B = μ₀nI

Read more: Magnetic Field Inside a Long Straight Solenoid

Motional emf Electromagnetic induction

A rod of length l moves with speed v perpendicular to a uniform field B, and perpendicular to its own length.

  1. Force on the charges. A charge q inside the rod feels the magnetic force F = qvB along the rod.
  2. Work done. Moving the charge along the rod through length l: W = qvB l
  3. Emf. Work per unit charge: ε = W/q = B l v
  4. Check with Faraday’s law. If the rod slides on rails, the area is l·x, so Φ = Blx and |ε| = dΦ/dt = Blv.
Result: ε = Blv

Read more: Motional EMF, Induced Current and Power Used

Impedance of a series LCR circuit and resonance Alternating current

A source of rms current I drives a resistor, an inductor and a capacitor in series.

  1. Voltages. VR = IR (in phase with the current), VL = IXL (leads by 90°) and VC = IXC (lags by 90°).
  2. Phasor addition. VL and VC point in opposite directions, so the net reactive voltage is VL − VC: V² = VR² + (VL − VC)²
  3. Impedance. Divide by I: Z = √(R² + (XL − XC)²) with XL = ωL, XC = 1/ωC
  4. Phase angle. tanφ = (XL − XC)/R.
  5. Resonance. When XL = XC, ωL = 1/ωC, so ω₀ = 1/√(LC) Here Z = R is a minimum and the current is a maximum.
Results: Z = √(R² + (ωL − 1/ωC)²); f₀ = 1 / 2π√(LC)
Fringe width in Young’s double-slit experiment Wave optics

Slits S₁ and S₂ are a distance d apart. The screen is a distance D away, with D much greater than d.

  1. Path difference. For a point P at a distance y from the central maximum, S₂P − S₁P ≈ d sinθ. For small angles sinθ ≈ tanθ = y/D: Δ = d y / D
  2. Bright fringes. Constructive interference needs Δ = nλ: yn = nλD / d
  3. Dark fringes. Destructive interference needs Δ = (n + ½)λ.
  4. Fringe width. The distance between two consecutive bright fringes: β = yn+1 − yn = λD / d
Result: β = λD/d, the same for bright and dark fringes
Bohr model: radius and energy of hydrogen-like atoms Atoms

An electron of charge e circles a nucleus of charge Ze at radius r.

  1. Centripetal force. mv²/r = Ze² / (4πε₀r²)
  2. Quantisation. Angular momentum is quantised, mvr = nh/2π, so v = nh / (2πmr).
  3. Radius. Substitute v in the first equation and solve: rn = n² h² ε₀ / (π m Z e²) = 0.529 n²/Z Å
  4. Energies. Kinetic energy K = ½mv² = Ze²/(8πε₀r) and potential energy U = −Ze²/(4πε₀r).
  5. Total energy. E = K + U = −Ze²/(8πε₀r). Substituting rn: En = − m Z² e⁴ / (8ε₀²h²n²) = −13.6 Z²/n² eV
Results: rn = 0.529 n²/Z Å; En = −13.6 Z²/n² eV
de Broglie wavelength of an accelerated electron Dual nature
  1. de Broglie relation. λ = h/p.
  2. Kinetic energy. An electron accelerated from rest through a potential difference V gains eV = ½mv².
  3. Momentum. p = mv = √(2meV).
  4. Substitute. λ = h / √(2meV)
  5. Put in the constants. h = 6.63 × 10⁻³⁴ J s, m = 9.11 × 10⁻³¹ kg, e = 1.60 × 10⁻¹⁹ C: λ ≈ 1.227 × 10⁻⁹ / √V metres
Result: λ = 12.27 / √V Å, with V in volts

Read more: Dual Nature Master Hub

Radioactive decay law and half-life Nuclei
  1. Assumption. The decay rate is proportional to the number of undecayed nuclei: dN/dt = −λN.
  2. Separate the variables. dN/N = −λ dt
  3. Integrate from N₀ at t = 0 to N at time t: ln(N/N₀) = −λt ⇒ N = N₀ e−λt
  4. Half-life. Put N = N₀/2 at t = T½: e−λT½ = ½ ⇒ T½ = ln2 / λ = 0.693/λ
  5. Mean life. The average lifetime is τ = 1/λ = 1.44 T½.
Results: N = N₀e−λt; T½ = 0.693/λ; τ = 1/λ

More derivations in your syllabus

These are also important. Revise each of them in the chapter notes, and practise them in the same way.

ChapterDerivations to learn next
Kinematics and laws of motionCentripetal acceleration, motion on a banked road, acceleration on an inclined plane
Rotational motionMoment of inertia of a ring, disc and rod; parallel and perpendicular axis theorems
GravitationVariation of g with height and depth, Kepler’s laws, satellite energy
Solids and fluidsEnergy stored in a stretched wire, terminal velocity, capillary rise
ElectrostaticsField of a dipole, torque on a dipole, potential of a point charge, capacitor with a dielectric
Current electricityMeter bridge, potentiometer, Kirchhoff’s laws, cells in series and parallel
MagnetismField on the axis of a circular loop, torque on a current loop, cyclotron, moving coil galvanometer
Induction and ACSelf and mutual inductance, energy in an inductor, AC through R, L and C, transformer
OpticsMirror formula, refraction at a spherical surface, lens maker’s formula, prism formula, single-slit diffraction
Modern physicsEinstein’s photoelectric equation, Rutherford scattering, nuclear density, binding energy

Keep learning on eduPhysics

Books and tools

Learn the skeleton first: the starting law or definition, the method (a force balance, an integral, energy conservation or geometry) and the final result. Then cover the steps and rewrite the derivation from memory, and draw the diagram before you begin. Repeat it a few times over several days, because spaced practice works better than reading it once.

Derivations that are often asked include the parallel plate capacitor, the magnetic field inside a solenoid, the force between two parallel current-carrying wires, motional emf, the impedance of a series LCR circuit, the fringe width in Young’s double-slit experiment, the Bohr model and the radioactive decay law. The questions change from year to year, so check the latest CBSE sample paper and marking scheme and practise every derivation in your syllabus.

NEET and JEE Main do not ask you to write a derivation, but they test the results and the ideas behind them. Knowing how a formula is derived helps you recall it, use it correctly, and change it when a question alters the setup, which matters most in the numerical-value questions of JEE Main.

Start with a labelled diagram and state any assumptions, such as “small angle” or “ideal gas”. Write each step on its own line, and name the law you use at each step. End with the final result, with its units, and underline or box it. A neat, logical order earns the marks even if you make a small slip in the algebra.

A diagram shows the setup and the quantities you use, such as the Gaussian surface, the Amperian loop, the direction of the force or the angle of a ray. It makes each step easier to follow and tells the examiner that you understand the method. In many board marking schemes, the diagram carries marks of its own.

Share this:

Like this:

Like Loading…