Resistance per cm of a given wire- Physics practical
Apparatus required
- Battery Eliminator 2 or 3 Amps
- One way plug key
- Rheostat 2.3 A, 56 Ohms
- Ammeter 0 to 3 A
- Resistance coil 100 cm or any desired length
- Voltmeter 0 to 3 V
- Resistance wire (alternative)
- Connecting wire (D.C.C)

Resistance per cm of a wire-Circuit Diagram & Experimental setup
Resistance per cm of a wire-Procedure
- Connect the ammeter in series with the circuit wire and the voltmeter in parallel with the wire.
- Note the zero error of the meters.
- Calculate the least count of the meters.
- Switch on the circuit.
- Set the rheostat to a particular position and record the readings of the ammeter and voltmeter.
- Repeat steps 5 and 6 for different settings of the rheostat.
- Tabulate the readings.
- Calculate the resistance of the wire using the formula R=V/I
- Resistance per cm is calculated from the above value.
Least count of an ammeter
Least count of a voltmeter
Resistance per cm of a wire:Tabular Column & Observation
Mapping potential-Graphing voltage against current

RESULT
The length of the given wire is 100 cm
The resistance per cm of the given wire is 0.03 Ohms

Leave a Reply