By eduPhysics • 15 November 2026 • 12 min read

Why does a pinch of phosphorus turn a lump of silicon into the heart of a computer chip? The answer lies in intrinsic and extrinsic semiconductors, one of the most scoring topics in the Class 12 NCERT chapter Semiconductor Electronics: Materials, Devices and Simple Circuits. In this guide you will learn what each type is, how n-type and p-type semiconductors are made, how their energy bands differ, the key formulas, and the questions examiners love to ask.
1. Conductors, Insulators and Semiconductors
Solids are classified using the energy gap (Eg) between the valence band (VB) and the conduction band (CB).
| Property | Conductor | Semiconductor | Insulator |
| Band gap | ~0 (overlap) | Less than 3 eV | More than 3 eV |
| Resistivity (Ω m) | 10−2 to 10−8 | 10−5 to 106 | 1011 to 1019 |
| Effect of temperature | Resistance increases | Resistance decreases | Almost none |
| Examples | Cu, Ag, Al | Si, Ge, GaAs | Diamond, glass |
2. What Is an Intrinsic Semiconductor?
An intrinsic semiconductor is a pure semiconductor crystal with no impurity added, such as pure silicon (Eg ≈ 1.1 eV) or pure germanium (Eg ≈ 0.67 eV). Each atom has four valence electrons and forms four covalent bonds with its neighbours.
At absolute zero all bonds are intact and the crystal behaves like an insulator. As temperature rises, thermal energy breaks some bonds. Each broken bond frees an electron and leaves behind a vacancy called a hole. Electrons and holes are therefore always created in pairs.
KEY POINT In an intrinsic semiconductor, n_{e} = n_{h} = n_{i}. The total current is the sum of electron current and hole current: I = I_{e} + I_{h}.
3. What Is an Extrinsic Semiconductor? (Doping Explained)
An extrinsic semiconductor is formed by adding a controlled amount of a suitable impurity to an intrinsic semiconductor. This process is called doping, and the added atoms are dopants. Typically, only a few parts per million of dopant atoms are needed, yet conductivity can rise by several orders of magnitude.
For the dopant to fit into the lattice without distorting it, its atomic size should be nearly equal to that of Si or Ge. Dopants are of two kinds:
- Pentavalent (valency 5): As, Sb, P, Bi. They make an n-type semiconductor.
- Trivalent (valency 3): B, Al, Ga, In. They make a p-type semiconductor.
4. n-Type Semiconductor
When a pentavalent atom such as phosphorus replaces a silicon atom, four of its five valence electrons form covalent bonds. The fifth electron is loosely bound and becomes a free electron with only a little thermal energy. The impurity atom is called a donor, because it donates an electron.
- Majority carriers: electrons; minority carriers: holes
- ne >> nh
- Donor energy level ED lies just below the conduction band
- The crystal remains electrically neutral; the donor becomes a fixed positive ion
5. p-Type Semiconductor
When a trivalent atom such as boron replaces a silicon atom, it has only three valence electrons, so one covalent bond is left incomplete. This vacancy behaves as a hole. A neighbouring bond electron can jump in, so the hole appears to move. The impurity is called an acceptor, because it accepts an electron.
- Majority carriers: holes; minority carriers: electrons
- nh >> ne
- Acceptor energy level EA lies just above the valence band
- The crystal remains electrically neutral; the acceptor becomes a fixed negative ion
6. Energy Band Diagrams of Intrinsic, n-Type and p-Type
In n-type material, electrons in the donor level need very little energy (of the order of 0.01 eV) to jump into the conduction band, so even at room temperature almost all donors are ionised. In p-type material, valence-band electrons easily jump into the acceptor level, leaving mobile holes behind in the valence band.
7. Intrinsic vs Extrinsic Semiconductors: Comparison Table
| Basis | Intrinsic | n-type extrinsic | p-type extrinsic |
| Purity | Pure crystal | Doped with pentavalent atoms | Doped with trivalent atoms |
| Carrier density | ne = nh = ni | ne >> nh | nh >> ne |
| Majority carriers | Electrons and holes (equal) | Electrons | Holes |
| Impurity level | None | Donor level near CB | Acceptor level near VB |
| Conductivity | Low, depends strongly on temperature | High, controlled by doping | High, controlled by doping |
| Charge | Neutral | Neutral | Neutral |
| Examples | Pure Si, Ge | Si + P, Si + As | Si + B, Si + Al |
8. Important Formulas for Exams
ne · nh = ni2
σ = e (ne μe + nh μh)
I = Ie + Ih
- The relation nenh = ni2 holds for both intrinsic and extrinsic semiconductors in thermal equilibrium. Doping an n-type sample raises ne and therefore reduces nh.
- For an n-type sample, ne ≈ ND, so nh ≈ ni2/ND.
- Here μ is the mobility of the carrier and e = 1.6 × 10−19 C.
WORKED EXAMPLE
Si has ni = 1.5 × 1016 m−3. It is doped with arsenic so that ND = 5 × 1022 m−3. Find nh.
Solution: ne ≈ ND = 5 × 1022 m−3. nh = ni2/ne = (1.5 × 1016)2 / (5 × 1022) = 2.25 × 1032 / 5 × 1022 = 4.5 × 10^{9} m^{−3}. The hole density has dropped by a factor of millions, which is why holes are minority carriers here.
9. Common Mistakes Students Make
- Saying an n-type crystal is negatively charged. It is neutral overall.
- Confusing donor with acceptor. Donor = pentavalent = n-type. Acceptor = trivalent = p-type.
- Drawing the donor level inside the conduction band. It sits slightly below it.
- Forgetting that minority carriers still exist and matter in diodes and transistors.
- Writing that resistance of a semiconductor increases with temperature. It decreases.
MEMORY TRICK n = negative carriers (electrons) from 5-valent atoms. p = positive carriers (holes) from 3-valent atoms.
10. Frequently Asked Questions (FAQs)
1. What is the difference between intrinsic and extrinsic semiconductors?
An intrinsic semiconductor is a pure crystal in which electron and hole concentrations are equal (ne = nh = ni). An extrinsic semiconductor is doped with impurities, so one type of carrier dominates and conductivity is much higher.
2. What are n-type and p-type semiconductors?
An n-type semiconductor is doped with a pentavalent donor such as phosphorus, so electrons are the majority carriers. A p-type semiconductor is doped with a trivalent acceptor such as boron, so holes are the majority carriers.
3. Is an n-type semiconductor negatively charged?
No. Both n-type and p-type semiconductors are electrically neutral. Each free electron contributed by a donor is balanced by the fixed positive donor ion left behind.
4. Why is doping done in semiconductors?
Doping raises conductivity in a controlled way and lets us create n-type and p-type regions. Combining them gives the p-n junction, the building block of diodes, LEDs, solar cells and transistors.
5. What is a hole in a semiconductor?
A hole is the vacancy left when a covalent-bond electron moves away. It behaves like a particle with a positive charge equal to that of an electron and moves when neighbouring bond electrons shift into it.
6. What is the relation between n_{e}, n_{h} and n_{i}?
In thermal equilibrium nenh = ni2. For an intrinsic semiconductor ne = nh = ni.
7. Why does the resistance of a semiconductor decrease with temperature?
Heating breaks more covalent bonds, generating more electron–hole pairs. The rise in carrier density outweighs the small fall in mobility, so resistivity decreases. Metals behave oppositely because their carrier density is nearly constant while collisions increase.
8. Which is better, silicon or germanium?
Silicon is used far more widely because its larger band gap (1.1 eV) gives lower leakage current at room temperature and it forms a stable oxide (SiO2), which is ideal for chip fabrication. Germanium (0.67 eV) is more sensitive to temperature.
9. What are donor and acceptor energy levels?
The donor level (ED) is a localised level just below the conduction band in n-type material. The acceptor level (EA) is a level just above the valence band in p-type material. Both sit very close to the bands, so very little energy is needed to ionise them.
10. What are majority and minority carriers?
Majority carriers are the more abundant charge carriers (electrons in n-type, holes in p-type). Minority carriers are the less abundant ones (holes in n-type, electrons in p-type).
11. Can an extrinsic semiconductor become intrinsic?
At very high temperatures thermally generated pairs exceed the doped carriers, and the material starts to behave like an intrinsic semiconductor. Practical devices must be kept below this temperature.
12. Why must dopant atoms be of similar size to Si or Ge?
If the dopant is much larger or smaller, it distorts the crystal lattice and creates defects. A similar size lets it take the place of a host atom without disturbing the structure.
FOUND THIS HELPFUL? Continue with the p-n Junction Diode, Rectifier Circuits and Logic Gates notes on eduPhysics, and share this guide with your study group.
Link to this topic
“Class XII chapter 12 Atoms”

Leave a Reply